Samsung HMX-H100N User Manual page 134

Message
Unknown Error
Card Error
Not Formatted
Not Supported Format
Not Supported Card
Low speed card. Please
record a lower Resolution.
Recording
Message
Write Error
Release the EASY.Q
Recovering Data...
Activate remote control.
Number of video files is
full. Cannot record video.
Number of photo files is
full. Cannot take a photo.
120_ English
Icon Informs that...
The memory card cannot be
- recognized in cases of Card Error, Not
Formatted or Not Supported Card.
The memory card has some problem
and can not be recognized.
The memory card is not formatted.
The memory card may have been
formatted by another device and may
still have existing images on it.
The memory card is not supported in
this camcorder.
The memory card does not have
-
enough performance to record.
Icon Informs that...
Some problem occured while writing
-
data to storage media.
You can not operate some functions
-
manually when EASY Q is activated.
The file was not created normally.
Remote function was set to off.
Folder and files have reached capacity
-
and you can not record.
Folder and files have reached capacity
-
and you can not take a picture.
Action
• Insert the proper memory card that has a
supported file format.
• Change memory card to another one.
• Format the memory card using menu item.
• The image format is not supported.
Check the supported file format.  page 82
• Format the memory card using menu item.
• Change the memory card with the one
recommended.
• Record movie at a lower resolution.
• Change memory card to faster one.  page 28
Action
• Format storage media using menus after backing-
up important files to your PC or another storage
media.
• Release EASY Q function.
• Wait until data recovery is finished.
• Never turn off the power and eject memory card
during recording.
• Set "Remote" function to "On."
• Set "File No." to "Reset" and format the storage
media.
• Set "File No." to "Reset" and format the storage
media.