Audio Dubbing; Dubbing Sound - Samsung D303(i) Owner's Instruction Book

Advanced Recording

Audio dubbing

✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.

Dubbing sound

1. Set the camcorder to PLAYER mode.
I
If you want to use an external microphone, connect the microphone to the
external MIC input jack on the camcorder.
I
When you wish to dub using the External A/V input, connect the AUDIO/VIDEO
cable to the camcorder by inserting the AUDIO/VIDEO cable into the AV Jack at
the right side of the camcorder. (VP-D301i/D303i/D303Di/D305i/D307i only)
- Press the MENU button, move the MENU SELECTOR to highlight A/V and
push the MENU SELECTOR.
- Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU
SELECTOR to select AV IN.
2. Press the (PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
I
A.DUB will be displayed on the LCD.
I
The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
I
Press the (STOP) button to stop the dubbing.
Notes
I
You can not use the audio dubbing function while playing a write protected video tape.
I
When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from
which you wish to record. (VP-D301i/D303i/D303Di/D305i/D307i only)
I
You cannot dub sound on a pre-recorded tape in LP mode or 16 bit mode.
ENGLISH
MIC
A/V
DC IN
MIC
Audio (L) Audio (R)
A/V
AV IN
DC IN
(VP-D301i/D303i/D303Di/D305i/D307i only)
65 65