Redieling The Last Number; Confirming Transmission; Automatic Redieling - Samsung SF 560 User Manual

Redialing the Last Number
To rediat the number you last called:
Press Redial/Pause.
If a document is loaded in the ADF, the machine automatically begins to
send,
Confirming Transmission
When the last page of your document has been sent successfully, the
machine beeps end returns to Standby Mode,
When something goes wrong while sending your fax, an error message
appears on the display. For e listing of error messages and their meanings,
see page 6.6.
If you receive an error message, press Stop/Clear to clear the message
and try to send the document again.
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. For further details, see the NSG Confirm
item on page 1.20.
Automatic Redialing
When the number you have dialed is busy or there is no answer when you
send a fax, the machine automatically rediels the number every three
minutes up to seven times by the factory default settings.
When the display shows "Retry Rediel ?," press Enter to redial the number
without waiting. To cancel the automatic redieling, press Stop/Clear.
To change the time interval between redials and the number of rediel
attempts. See page 1.20.
BASIC FUNCTIONS