Handset
and Handset
Cradle
1
Plug the end of the coiled cord of the handset into the jack on the Ieft
side of your machine.
\
\kJ
2
Holding the cradle as shown, attach the handset cradle to the machine.
i
Insert the two tabs of the cradle into the slots on the Teft side of the
machine as shown.
72 Push the cradle toward the machine until it locks into place.
NOTE:
• The cradle and handset
must be installed for correct
operation
of the set
• To remove
the cradle, push it down, pressing
the latch on the bottom
of the
cradle.
GEl-rING STARTED