Replacing The Toner Cartridge - Samsung SCX-4824FN User Manual

Multi functional printer
Hide thumbs Also See for SCX-4824FN:
Table of Contents

Advertisement

4. Slide the toner cartridge back into the machine.
5. Close the front cover. Make sure the cover is securely latched.
If the front cover is not completely closed, the machine will not
operate.

REPLACING THE TONER CARTRIDGE

The status LED and the toner-related message on the display indicates
that the toner cartridge should be replaced.
Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of
toner cartridge for your machine. (See "Ordering supplies and
accessories" on page 80.)
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Completely open the front cover.
Do not touch the green surface, the OPC drum or the front of
each toner cartridge, with your hands or any other material. Use
the handle on each cartridge in order to avoid touching this area.
Be careful not to scratch the surface of the paper transfer belt.
If you leave the front cover open for more than a few minutes, the
OPC drum can be exposed to light. This will cause damage to the
OPC drum. Close the front cover should the installation need to
be halted for any reason.
3. Grasp the handles on the toner cartridge and pull to remove the
cartridge from the machine.
4. Take a new toner cartridge out of its package.
Don't use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
5. Holding both handles on the toner cartridge, thoroughly rock it from side
to side to evenly distribute the toner.
6. Place the toner cartridge on a flat surface, as shown, and remove the
paper covering the toner cartridge by removing the tape.
If toner gets on your clothing, wipe it off with a dry cloth and wash
it in cold water. Hot water sets toner into fabric.
7. Grasp the handles on the toner cartridge. Insert the cartridge until it
clicks into place.
Maintenance_ 61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents