Canon HJ40x10B Operation Manual page 67

Shtl button
・ The zoom moves to the shuttle memory position while
the Shtl button is held down. Once this position is reached,
the zoom stays in this position while the Shtl button is
held down.
Shuttle memory
position
Shtl button is held down
・ Releasing the Shtl button returns the zoom to the original
position.
Shuttle memory
position
Shtl button is released
For the details of this function, see the section
Function 1. Shuttle Shot.
●
Memo button
Pressing the memo button together with other button
allows you to preset the zoom position, direction and/or
speed.
・ Setting the shuttle memory position
Memo ＋
Press
・ Setting the framing memory position
Press
Memo ＋
・ Setting the zoom speed and zoom direction
During pressing
Zoom rocker seesaw
Frame button
The zoom moves to the preset zoom position, when the
frame button is pressed. The zoom moves at the preset
speed when the speed mode selector lever is set to Pre
position, or at the maximum speed when it is set to Fast
position.
Framing memory
position
For the details of this function, see the section
Function 2. Framing Preset.
●
Speed button （When assigning the function）
When the button ( RET or VTR switch which is assigned
for the speed preset function ) is pressed, the zoom starts
to move at the preset speed and to the determined direction
and stops at the zoom end. (either narrow angle end or
wideangle end).
Zoom end
−Moves at the preset speed−
For the details of this function, see the section
Function 3. Speed Preset.
●
List of Digital Function Buttons
Original position
Original position
Shtl
at the desired position.
at the desired position.
Frame
+
Memo
Any zoom position
Frame button is pressed
Any zoom position
Preset button is pressed
※ （NOTE） : The sticker is very useful to remind
these digital servo functions.
So, put it on your convenient place.
E21