Power Control Feature; Supported Os; Notes On Using Windows Server 2008 - NEC Express5800/T120e Maintenance Guidance

Chapter 2 Useful Features
3.

Power Control Feature

For a device that has a Xeon Processor, power consumption of the server can be controlled through the
command line interface of EXPRESSSCOPE Engine 3 (BMC) or by using NEC ESMPRO Manager. This
feature curves the upper limit of the power consumption, which allows more servers to be installed in the
environment where the power consumption is limited.
For settings information, see "EXPRESSSCOPE Engine3 User's Guide" or NEC ESMPRO Manager online
help.
3.1

Supported OS

The power control feature is available for the following OSs.
OSs that support the power control feature

Windows Server 2003 R2, Standard Edition (SP2 or later)

Windows Server 2003 R2, Enterprise Edition (SP2 or later)

Windows Server 2003 R2, Standard x64 Edition (SP2 or later)

Windows Server 2003 R2, Enterprise x64 Edition (SP2 or later)

Windows Server 2008, Standard

Windows Server 2008, Enterprise

Windows Server 2008, Standard x64

Windows Server 2008, Enterprise x64

Windows Server 2008 R2, Standard x64

Windows Server 2008 R2, Enterprise x64

Red Hat Enterprise Linux 5.9 or later (x86)

Red Hat Enterprise Linux 5.9 or later (EM64T)

Red Hat Enterprise Linux 6.4 or later (x86)

Red Hat Enterprise Linux 6.4 or later (x86_64)
3.2

Notes on Using Windows Server 2008

Ignore the following event when running Windows Server 2008. This event is logged at the normal operation
of controlling the server power.
Source:
Event ID: 7
Level:
User:
Kernel-Processor-Power
Warning
SYSTEM
Express5800/T120e Maintenance Guide
3. Power Control Feature
85