Menus Of Expressbuilder - NEC Express5800/T120e Maintenance Guidance
Express5800 series
Hide thumbs
Also See for Express5800/T120e:
- Quick start manual (6 pages) ,
- Specifications (2 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
5.2
Menus of EXPRESSBUILDER
EXPRESSBUILDER is operated by using onscreen menus.
(1)
Boot Selection Menu
When EXPRESSBUILDER starts from disc or Internal Flash Memory, the following menu appears.
OS installation *** default ***
Tool menu (Normal mode)
Tool menu (Redirection mode)
Use the upper and lower arrow keys to move the cursor, and then press <Enter> key to choose it.
OS installation is selected if no key is pressed.
Home Menu shown in (2) Home Menu appears when choosing OS installation.
Tool Menu shown in (3) Tool Menu appears when choosing Tool menu (Normal mode). The screen appears
on the display. Choose this mode usually.
You can operate EXPRESSBUILDER remotely by using BIOS Console Redirection when choosing Tool menu
(Redirection mode). The menu items and the tools are the same as the normal mode.
Boot selection
Tips
Choose the normal mode when using the remote KVM feature.
Express5800/T120e Maintenance Guide
5. Details of EXPRESSBUILDER
105
Advertisement
Table of Contents
