Using Your Active Stylus; Putting Your Seal Into Sleep Mode; Waking Up Your Seal - Bak USA Seal User Manual

Using Your Active Stylus

After following the installation for the batteries in your stylus, you can use the
stylus immediately.
To perform a left-click, touch the tip of your stylus to the screen.
To perform a right-click, touch the tip of your stylus to the screen and press the
lower button (the button closest to the tip).
To perform a double-left click, touch the tip of your stylus to the screen and
press the upper button (the button farthest from the tip).
Put Your Seal into Sleep Mode
When you will be away from your Seal for a short time, put the Seal to sleep. To do so, perform
one of the following:
• Press the power button once briefly
OR
• Open the Start menu, select Power and then Sleep
To wake up your Seal, press the power button once briefly.
Upper Button: Double Click
Lower Button: Right Click
Lower Button: Single Click
4