Command-Line Interface (Cli) - IBM Storwize V5010 Manual

Implementing the ibm storwize v5000 gen2 with ibm spectrum virtualize v8.1

Hide thumbs Also See for Storwize V5010:

Table of Contents

For more information, see Chapter 3, "Graphical user interface overview" on page 77.

After you complete the initial configuration that is described in 2.10, "Initial configuration" on

page 55, the IBM Storwize V5000 Gen2 System overview window opens, as shown in

Figure 2-12.

Figure 2-12 Setup wizard: Overview window

2.8.2 Command-line interface (CLI)

The command-line interface (CLI) is a flexible tool for system management that uses the

Secure Shell (SSH) protocol. A public/private SSH key pair is optional for SSH access. The

storage system can be managed by using the CLI, as shown in Example 2-1.

Example 2-1 System management by using the command-line interface

IBM_Storwize:ITSO-V5000:superuser>svcinfo lsenclosureslot

enclosure_id slot_id port_1_status port_2_status drive_present drive_id

Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1

Show Quick Links

Table of Contents

Storwize v5020 Storwize v5030