Table of Contents
Advertisement
Controls
Stitch counting
●
TE/Speed
●
●
●
Scrolling
●
PM
●
F1
●
F2
●
F3
●
F4
●
8
If this key is pressed the corresponding function is switched on or off. The value for the
compensating stitches can be changed immediately with the corresponding +/- key.
When the function is switched on, the machine moves to the next seam section after se-
wing the number of stitches entered.
In the programmed sewing mode, the number of stitches is entered by stitching them
off.
If this key is pressed once, the machine changes to parameter input.
If this key is pressed twice (within 5 seconds) the machine changes to stitch input.
If this key is pressed in the programmed sewing mode, the machine scrolls through the
input menus on the display.
If this key is pressed the programmed sewing function is switched on or off. When the
function is switched on, the letters "PM" appear on the display of the control panel. The
parameters related to the program are shown in the alpha-numerical part of the display.
No function assigned
No function assigned
No function assigned
No function assigned
Advertisement
Table of Contents
