About This Document - Siemens FDA241 Technical Manual

1 About this document

Target group
Product Manager
Project Manager
Project engineer
Installation personnel
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document contains all the information you'll need about the following
aspirating smoke detectors:
FDA241

FDA221

Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Intended use
Aspirating smoke detectors FDA241 and FDA221 may only be used for fire
detection and fire control purposes.
Target groups
The information in this document is intended for the following target groups:
Activity
Is responsible for information passing

between the manufacturer and regional
company.
Coordinates the flow of information

between the individual groups of people
involved in a project.
Coordinates the deployment of all

persons and resources involved in the
project according to schedule.
Provides the information required to run

the project.
Sets parameters for product depending

on specific national and/or customer
requirements.
Checks operability and approves the

product for commissioning at the place
of installation.
Is responsible for trouble-shooting.

Assembles and installs the product

components at the place of installation.
Carries out a performance check

following installation.
Configure the product at the place of

installation according to customer-
specific requirements.
Check the product operability and

release the product for use by the
operator.
Searches for and corrects malfunctions.

Carries out all maintenance work.

Checks that the products are in perfect

working order.
Searches for and corrects malfunctions.

About this document
Applicable documents
Qualification
Has obtained suitable specialist training

for the function and for the products.
Has attended the training courses for

Product Managers.
Has obtained suitable specialist training

for the function and for the products.
Has attended the training courses for

Project Managers.
Has obtained suitable specialist training

for the function and for the products.
Has attended the training courses for

Product Engineer.
Has received specialist training in the

area of building installation technology
or electrical installations.
Has obtained suitable specialist training

for the function and for the products.
Has attended the training courses for

commissioning personnel.
Has obtained suitable specialist training

for the function and for the products.
A6V10334410_h_en_--
1
7
2015-09-29