Connecting To An Hdbaset Transmitter; Connecting To External Output Devices - Epson EB-L615U User Manual

Projector Connections
The connection method varies depending on your Epson document camera
model. See the document camera manual for details.

Connecting to an HDBaseT Transmitter

To send an HDMI or RS-232C signal over a long distance, you can connect
the projector to an optional HDBaseT transmitter using a 100Base-TX
network cable (EB‑L615U/EB‑L610U/EB‑L510U/EB‑L610W). This is useful
when you want to send a signal to or control the projector from a remote
location, such as in a hall or event site, since you can use a network cable up
to 100 m in length. To ensure proper data transmission, use a Category 5e
STP cable or better. However, operation is not guaranteed for all input/output
devices and environments.
• To enable communication from the Ethernet and serial ports on the
a
transmitter, select On as the Control Communications setting in the
projector's Extended menu (Standby Mode is automatically set to
Communication On). Turning on this setting disables the projector's
LAN and RS-232C ports.
s Extended > HDBaseT > Control Communications
s Extended > Standby Mode > Standby Mode
• If you connected an Extron XTP transmitter or switcher to the
projector's HDBaseT port, select On as the Extron XTP setting in the
projector's Extended menu (Control Communications is
automatically set to On, and Standby Mode is automatically set to
Communication On).
s Extended > HDBaseT > Extron XTP
s Extended > Standby Mode > Standby Mode
• Wired remote control using the HDBaseT port is not available.
a
Turn off the projector and HDBaseT transmitter.
Make sure the projector and HDBaseT transmitter are turned off
a
when connecting or disconnecting a network cable between the
two devices.
b
Connect one end of the network cable to the HDBaseT port on the
transmitter.
c
Connect the other end to the projector's HDBaseT port.
See the documentation that came with the HDBaseT transmitter
a
for instructions on connecting it to your video device or
computer.
d
Turn on the projector and HDBaseT transmitter.
g g Related Links
• "Projector Setup Settings - Extended Menu"

Connecting to External Output Devices

Follow the instructions in these sections to connect external devices to the
projector.
g g Related Links
• "Connecting to a VGA Monitor"
• "Connecting to External Speakers"
p.158
p.28
p.28
27