Daikin LRYEQ16AY1 Service Manual page 128

Field Setting
[2-7] Low night noise setting by time
Set this to low noise operating during night-time by time. Change the [Low night noise operation start setting] and [Low
night noise operation end setting] as necessary. (The controller recognizes the time using AIRNET.)
If both the [Low noise setting by outdoor air temperature (page 2-5)] and [Low night noise operation setting by time
(Page 2-7)] are used at the same time, the fan will run on the setting that has a lower number of fan taps.
Detailed setting procedures
(1) LED
H1P H2P H3P
SW
BS1 BS2 BS3
(2) LED
H1P H2P H3P
SW
BS1 BS2 BS3
(3) LED
H1P H2P H3P
SW
BS1 BS2 BS3
(4) LED
H1P H2P H3P
SW
BS1 BS2 BS3
(5) LED
H1P H2P H3P
SW
BS1 BS2 BS3
(6) LED
H1P H2P H3P
SW
BS1 BS2 BS3
(7) LED
H1P H2P H3P
SW
BS1 BS2 BS3
127
H4P H5P H6P H7P
BS4 BS5
H4P H5P H6P H7P
BS4 BS5
H4P H5P H6P H7P
BS4 BS5
H4P H5P H6P H7P
BS4 BS5
H4P H5P H6P H7P
BS4 BS5
H4P H5P H6P H7P
LED
: ON
BS4 BS5
: OFF
: BLINK
H4P H5P H6P H7P
SW
: BS button
BS4 BS5
(1) Page 0
(Normal operating condition)
Press and hold B1 (MODE) for 5 seconds.
(2) Changes to Page 2
Press BS2 (SET) 7 times.
(3) Changes to Page 2-7
Press BS3 (RETURN) once.
(4) Previous setting status blinking
(Setting status shown at left: OFF)
Press BS2 (SET) to cycle through the number of fan taps.
11 9 8 7
Press BS2 (SET) a few times.
(5) Select setting for Page 2-07
Low night noise operation setting by time
(Setting shown at left: Fan taps = 8 in standard setting)
Press BS3 (RETURN) 2 times.
(6) Confirm Page 2 settings
Press BS1 (MODE) once.
(7) Settings completed
SiBE811001EB
CONVENI-PACK