Advertisement
C A R T R I D G E R E P L A C E M E N T
Remove feed tray by lifting
upward and gently pulling
away from dispenser.
To Install New
Cartridges
Position cartridge
leader between
the rubber rollers
in dispenser.
Turn handle
clockwise to
advance film.
Insert new supply cartridge.
Continue to turn
handle until film
is aligned and
wrinkle-free.
Install feed tray and
trim off excess film
using cut blade.
Remove used supply cartridge
by pulling outward. If there is film
between the rollers, turn handle
counter-clockwise.
To Install Part-Used
Cartridges
Attach reusable
cartridge starter tool
to partially used
supply cartridge.
Insert partially
used supply
cartridge into
dispenser.
Note: Tool
should be
positioned
between
rubber rollers in
dispenser.
Turn handle
clockwise until
tool has exited
dispenser and
film is aligned
and wrinkle-free.
Store reusable
starter tool for
later use.
Install feed
tray and trim
off excess
film using cut
blade.
Advertisement
