Siemens SITRANS LG270 Operating Instructions Manual page 40

Menu - Diagnosis
Menu
Diagnostics
Diagnostics
Menu - Additional adjustments
Menu
Additional adjustments
Additional settings - Copy
instrument settings
40
Menu item
Status signals - Function control
Status signals - Out of specification
Status signals - Maintenance
Device memory - Echo curve memory
Device memory - Measured value memory
Device memory - Measured value memory -
Measured values
Device memory - Measured value memory - Re-
cording in time interval
Device memory - Measured value memory - Re-
cording with measured value difference
Device memory - Measured value memory - Start
with measured value
Device memory - Measured value memory - Stop
with measured value
Device memory - Measured value memory - Stop
recording when memory is full
Menu item
PIN
Date
Time
Time - Format
Probe type
The instrument settings are copied with this function. The following
functions are available:
•
Read from sensor: Read data from sensor and save in the display
and adjustment module
•
Write to sensor: Save data from the display and adjustment mod-
ule back into the sensor
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "Setup" and "Display"
•
In the menu "Additional adjustments" the items "Reset, Date/Time"
•
Special parameters
SITRANS LG270 - Operating Instructions
Default value
Switched on
Switched off
Switched off
Stopped
Started
Distance level, percentage val-
ue level, reliability level, electronics
temperature
3 min.
15 %
Not active
Not active
Not active
Default value
0000
Actual date
Actual time
24 hours
Device-specific
PBD-51041071