Connecting Pcs; Single Pc Connection; Multiple Pcs Connection; Figure 3-3 Connecting The Rj-45 Ethernet Cable To The Ethernet Port And A Singnal Pc - Samsung InfoRanger SCM 110R User Manual

Connecting PCs

The InfoRanger can be connected to a single PC or to group of PCs by using a
hub or switch. Separate network cables are necessary when you connect PCs
and note that the InfoRanger only provides the straight-through network cable
for a single PC connection. If connecting more than one PC then separate
cables should be prepared.

Single PC Connection

First, turn off the PC, which you will connect to the InfoRanger. Using the RJ-
45 network cable (provided with the InfoRanger), connect the ETHERNET
port of the InfoRanger to the port of the network interface card on the PC.

Figure 3-3 Connecting the RJ-45 Ethernet cable to the ETHERNET port and a singnal PC

Multiple PCs Connection

If you want to connect more than one PC to the InfoRanger, you need to
prepare the following additional items:
An Ethernet hub or switch with 10Mbps transmission speed
Twisted pair category-3, 4, 5 crossover cable
Twisted pair-category-3, 4, 5 straight-through cables equal to the number of
PCs
Network Interface Card
straight-through Cable
3-3