Connecting Pcs - Samsung InfoRanger SCM-140U User Manual

Connecting PCs

You can connect the InfoRanger to a single PC or to group of PCs through a hub or
a switch. You must use RJ-45 Ethernet cable (straight-through cable) or USB
cable which are provided with the InfoRanger to connect the InfoRanger to PC. To
connect additional PCs to the InfoRanger, you must prepare the additional
Straight-through Ethernet cables, a hub, and a Crossover Ethernet cable.
You can use both Ethernet port and USB port at a time without any kind of
specific operation.
Use Ethernet port and prepare Network Interface Card and a Hub to
connect the InfoRanger to multiple PCs. You can connect the USB port to
only one PC at a time. Or, use both Ethernet port and USB port
simultaneously.
It is possible to connect the InfoRanger to multiple PCs by using USB port
and Ethernet port at the same time, but the amount of PCs is dependent on
the Cable Service Provider. Contact your Cable Service Provider for further
information.
3-3