Wap Logging On; Downloading Objects; Wap Logging Off; Gprs (Depending On Model) - Sagem MyX2-2m User Manual

Once all the settings have been entered, you can activate the chosen access provider. Select him from the list. Confirm your
choice with OK.
Inactivity time is used to choose the time after which the call is automatically disconnected if you have forgotten to log off
from a service.

WAP Logging on

The connection to a WAP service on the GPRS network is not cut if an incoming call is received. You can answer the call.
Using the Welcome menu, you can log onto your access provider's WAP site by pressing the right programmable key .
If you are logging onto the GSM network, the @ symbol flashes, the metering of the cost of the call starts as soon as it stops
flashing.

Downloading objects

Some WAP sites allow you to download ring tones, icons or animated screensavers. Once downloaded, they are stored in
your phone's memory. You can then save them in your phone (same operation as used for downloading using SMS).

WAP Logging off

To log off press Stop key.
The logoff happens automatically after a few seconds of inactivity if you forget to log off.
This period is defined by the inactivity time setting.

GPRS (depending on model)

A flashing icon indicates that the phone is logging onto a GPRS network.
A non-flashing icon indicates that the GPRS network is available; if the icon is dark, it indicates that the phone is logged onto
the GPRS network: see page 41 for the attachment options.
This icon is not displayed if the GPRS network is not available or if the SIM card inserted in your phone does not include the
GPRS service. It may also disappear when accessing WAP services if the connection uses the GSM network instead of the
GPRS network.
34
WAP