Searching For A Network; Switching Off - Sagem myC-1 Owner's Manual

Getting started
Network indicator
The indicator of the level of
network signal received enables
you to visualise the quality of
reception. If it shows less than
three bars, look for better
reception to make your call in
good conditions.
16
myC-1_en_02Getting started.pmd
Setting the date
Set the date either by typing it in numerically or by
using the scrolling arrows to alter the display.
When the time and date are correct, confirm with the
OK key.

Searching for a network

The phone then searches for a network on which it
can communicate:
If it finds one, the name of the network appears on
the screen.
You are ready to make or receive a call.
If the R letter and a network name are displayed,
calls can be made.
If the R letter is displayed without any network name,
only emergency services will be accessible (police,
ambulance, fire brigade).
If the flashes, the phone will keep searching. No
network is available.

Switching off

Hold down the key until the end message is
displayed.
Release the key. The phone switches off.
16 22/12/2003, 16:17