Cleaning; Using Your Pro Steam Mop - Shark S3973D Quick Start Manual

With the Intelli-Mop™ Head, you can quickly and easily attach and release the Dirt Grip™
Pads without touching them. No more wrestling with dirty, wet pads. The Dirt Grip Pads
are double-sided, washable and reusable. For pad attachment and removal instructions
see the following page.

USING YOUR PRO STEAM MOP

Your Pro Steam Mop is ideal for deep cleaning and cutting through dirt
and grime in high-traffic areas, as well as for sanitizing* floors.
*Sanitization studies were conducted under controlled test conditions.
Household conditions and results may vary. With the Intelli-mop head only
in SCRUB mode. Not in above floor mode or when using Steam Blaster. See
Owner's Guide for instructions.
Plug the power cord into an outlet.
The STEAM CONTROL button will flash blue.
Press the STEAM CONTROL button to
select your steam setting: Once for DUST,
twice for MOP, and three times for SCRUB.
Pressing a fourth time will place the unit in
STANDBY MODE.
SETTING
DUST
MOP
SCRUB

CLEANING

IDEAL FOR
THESE SEALED
SURFACES
Laminate
Hardwood
Marble
Hardwood
Marble
Tile
Stone
Hardwood
Marble
Tile
Stone
RECOMMENDED
USAGE
Light cleaning and dusting
Loosening and lifting light dirt
Cleaning delicate surfaces
Cleaning most surfaces and large areas
Basic, everyday cleaning
Removing spots and smaller messes
Cleaning moderate and heavy-traffic areas
Deep cleaning and cleaning hard-to-clean surfaces
Tough cleaning and removing stuck-on messes and stains
Deep cleaning heavy-traffic areas
Cutting through heavy dirt and grime
Sanitizing* floors