Above-Floor Cleaning; Custom Cleaning Accessories; Direct Steam Nozzle; Garment Steamer - Shark S3973D Quick Start Manual

ABOVE-FLOOR CLEANING

Remove the Handheld Steamer by pressing the release button and pulling it away from
the cradle.
Note: In Handheld Mode, the STEAM CONTROL is preset to SCRUB to optimize above-floor
cleaning and garment steaming.
Snap the desired accessory into the main nozzle of the Handheld Steamer. Then squeeze the
steam trigger to activate steam.
Using 3-to-5-second bursts of the trigger will allow you to steam longer and with more control.
Once done with handheld steaming, press the STEAM CONTROL button until the light flashes
blue to put the unit in STANDBY MODE. Let cool for 2 to 3 minutes before removing mop
head, pads, or handheld accessories and storing.

CUSTOM CLEANING ACCESSORIES

DIRECT STEAM NOZZLE

For spot cleaning and direct steaming

GARMENT STEAMER

Freshen clothing, fabrics and
upholstery
CAUTION: Make sure the Steam Mop is unplugged or in Standby Mode while attaching or
removing the accessories. Avoid touching the accessories, as they will be very hot after steaming.
It is recommended that you allow the pads to cool off before removing them from the accessories
to avoid possible scalding injury.

HOW TO ATTACH

Slide nozzle onto the Handheld Steamer.
Slide the Garment or Upholstery Bonnet onto
the Garment Steamer. Elastic will hold the
bonnet in place.
Snap the bristle over the Garment Steamer
and bonnet then click the Garment Steamer
onto the Handheld Steamer.