Resetting All Settings - Dukane 8945WU User Manual

Regarding the indicator lamps
Regarding the indicator lamps (continued)
NOTE
• When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufficiently cooled down, please make
confirmation of the attachment state of the lamp and lamp cover, and then turn
the power on again. If the projector is used at an altitude of about 1600 m (5250
feet) or higher, set ALTITUDE of the SERVICE item in the OPTION menu to
HIGH (67). Otherwise, set it to NORMAL.

Resetting all settings

When it is hard to correct some wrong settings, the FACTORY RESET function of
SERVICE item in OPTION menu (7 1 ) can reset all settings (except settings such
as LANGUAGE, AUTO BLANK, LAMP TIME, FILTER TIME, FILTER MESSAGE,
STANDBY MODE, COMMUNICATION, SECURITY and NETWORK)
to the factory default.
9 8