Assembly - Ryobi BE321VS Operator's Manual

KNOW YOUR BELT SANDER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SWITCH TRIGGER
To turn the sander ON, depress the switch trigger. Release
switch trigger to turn your sander OFF.
LOCK- ON BUTTON
The lock-on feature allows you to lock the switch trigger in
the ON position. Locking the switch trigger on allows you to
operate the sander for extended periods of time.
TRACKING KNOB
The tracking knob allows you to easily adjust the belt tracking.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Variable Speed Belt Sander
Dust Collection Bag
Sanding Belt, 80 Grit
Operator's Manual
Warranty Registration Card
FEATURES
VARIABLE SPEED CONTROL DIAL
The variable speed control feature allows the sander to
develop a no load speed that can be adjusted from 775 to
1,150 ft./min. by rotating the dial from A to F. The variable
speed control dial is conveniently located on the side of the
front handle.
DUST COLLECTION BAG
The dust collection bag attaches to the sander and keeps
dust to a minimum.
BELT TENSION RELEASE LEVER
The tension release lever aids in quick and easy belt changes.
GRIPZONE
The sander features Gripzone™ overmold technology for
improved comfort with a positive grip.

ASSEMBLY

WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
9
OVERMOLD TECHNOLOGY
™