Features - Ryobi BE318 Operator's Manual

DOUBLE INSULATION
Double insulation is a concept in safety in electric power
tools, which eliminates the need for the usual three-wire
grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need
to be grounded.
WARNING:
The double insulated system is intended to protect
the user from shock resulting from a break in the
tool's internal wiring. Observe all normal safety pre-
cautions to avoid electrical shock.
Important: Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service
technician. For service, we suggest you return the tool to
your nearest authorized service center for repair. Always
use original factory replacement parts when servicing.

FEATURES

ELECTRIC MOTOR
Your sander has a precision built electric motor. It
should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current). Do
not operate this tool on direct current (DC). A substantial
voltage drop will cause a loss of power and the motor will
overheat. If your tool does not operate when plugged
into an outlet, double-check the power supply.
SWITCH
Your sander has a conveniently located trigger switch.
LOCK-ON
The lock-on feature allows you to lock the sander on
when you operate it continuously for extended periods of
time.
DUST COLLECTION BAG
The dust collection bag attaches to the sander and
keeps dust to a minimum.
ERGONOMIC DESIGN
The design of the sander provides for easy handling. It
is designed for comfort and ease of grasp when operating
in different positions and at different angles.
7