Table of Contents
Advertisement
MOUNTING THE TABLE TO A WORK
SURFACE
See Figure 10a and 10b.
Follow these directions to mount the table to a work
surface.
Place the router table right side up on a sturdy work
surface, e.g., work stand, workbench, counter top.
Mark the holes with a pencil.
Remove the router table.
Drill four holes through the work surface.
Place the router table back on the work surface,
aligning the holes in the table legs with the holes in
the work surface.
NOTE: Position the router table surface at
approximately hip height.
Insert four bolts (not included, 1/4-20 recommended)
and tighten securely with lock washers and hex nuts
(not included).
NOTE: If you plan to transport the router table to
different locations, we recommend that you attach it
permanently to a mounting board that you can easily
clamp to a work surface.
ASSEMBLY
12
Fig. 10a
Fig. 10b
Hide quick links:
Advertisement
Table of Contents
