Exhaust System - Echo SRM-3020T Operator's Manual

MAINTENANCE
5. Remove grass and leaves from
the grid (C) between the recoil
starter and fuel tank.
6. Assemble components in
reverse order.

Exhaust System

Spark Arrestor Screen
Level 2.
Parts Required:
1. Remove spark plug lead.
2. Remove muffler cover (A).
3. Place piston at Top Dead
Center (TDC) to prevent carbon
or dirt from entering cylinder.
4. Remove spark arrestor screen
cover (B), gasket (C), and
screen (D), from muffler body.
5. Clean carbon deposits from
muffler components.
Note: When cleaning carbon deposit, be careful not to damage the
catalytic element inside muffler.
6. Replace screen if it is cracked, plugged, or has holes burned through.
7. Assemble components in reverse order.
Exhaust Port Cleaning
Level 2.
Parts Required:
36
Spark Arrestor Screen, Gasket
As needed: Heat Shield
SRM-3020T
C
D
B
C
X7502350100
© 04/2018 ECHO Inc.
A