Stopping Engine; Applications - Echo SRM-3020T Operator's Manual

SRM-3020T
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not start after 5 pulls, use Cold Start
Procedure.

Stopping Engine

1. Throttle
Release throttle trigger and
allow engine to return to idle
before shutting off engine.
2. Stop Switch
Move stop switch button (A)
backward to STOP position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.

Applications

Nylon line heads may be used for trimming, scything, edging, and scalping
of grass and light weeds
Trimming
Feed the spinning line into the material to be cut. Tilt the line head to one
side to direct cutting debris away from you:
• Model SRM/PAS/SB (Straight shaft, counter-clockwise line head rotation)
- Tilt the cutting head down on the right side (muffler side) while cutting to
direct cutting debris away from operator. Feed the line gradually into the
material you wish to cut, avoiding contact with fences or other barriers
X7502350100
© 04/2018 ECHO Inc.
OPERATION
A
D
27