Microprocessor Control; Wireless Remote Controller; Indoor Unit Display Section - Mitsubishi Electric MLZ-KP25VF Service Manual

10

MICROPROCESSOR CONTROL

MLZ-KP25VF MLZ-KP35VF MLZ-KP50VF

WIRELESS REMOTE CONTROLLER

Operation display section
Temperature buttons
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.

INDOOR UNIT DISPLAY SECTION

Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
•The following indication applies regardless of shape of the indication.
Indication
The unit is operating to
reach the set temperature
The room temperature is
approaching the set tem-
perature
Standby mode
(Refer to multi system
operation)
OBH801
Signal transmitting section
Distance of signal: About 6 m
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
Battery replacement indicator
OPERATION SELECT button
STOP/OPERATE
(OFF/ON) button
ECONO COOL button
Indication of
remote controller
model is on back
Operation state Room temperature
About 2°C or more away
from set temperature
About 1 to 2°C from set
temperature
i save button
-
16
Operate the remote control-
ler in the area where signal is
received, and beep is heard.
90°
FAN SPEED CONTROL button
WIDE VANE control button
VANE CONTROL button
TIME, TIMER set buttons
FORWARD button
BACKWARD button
WEEKLY TIMER
set button
RESET button
CLOCK SET button
Lit
Blinking
Not lit