Mitsubishi Electric MLZ-KP25VF Operating Instructions Manual
Ceiling cassette type air conditioners
Hide thumbs
Also See for MLZ-KP25VF:
- Operating instructions manual (208 pages) ,
- Service manual (43 pages) ,
- Installation manual (12 pages)
Related Manuals for Mitsubishi Electric MLZ-KP25VF
Summary of Contents for Mitsubishi Electric MLZ-KP25VF
- Page 1 CEILING CASSETTE TYPE AIR CONDITIONERS INDOOR UNIT MLZ-KP25VF MLZ-KP35VF MLZ-KP50VF For user OPERATING INSTRUCTIONS English • To use this unit correctly and safely, be sure to read these operating instructions before use.
-
Page 2: Safety Precautions
● OPERATING INSTRUCTIONS ● ONTENTS I SAFETY PRECAUTIONS I PREPARATION BEFORE OPERATION I NAME OF EACH PART I SELECTING OPERATION MODES I FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT I I- SAVE OPERATION I ECONO COOL OPERATION I TIMER OPERATION (ON/OFF TIMER) I WEEKLY TIMER OPERATION I CLEANING I WHEN YOU THINK THAT TROUBLE HAS OCCURRED... - Page 3 AFETY PRECAUTIONS If the battery fl uid comes in contact with your skin or clothes, WARNING wash them thoroughly with clean water. • If the battery fl uid comes in contact with your eyes, wash them When the air conditioner does not cool or heat, there is a pos- thoroughly with clean water and immediately seek medical attention.
-
Page 4: Preparation Before Operation
● OPERATING INSTRUCTIONS ● REPARATION BEFORE OPERATION Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on. Installing the remote controller batteries Setting current time Press the DAY button Press CLOCK. Press RESET. to set the day. Remove the front lid. -
Page 5: Indoor Unit
AME OF EACH PART Indoor unit Remote controller Horizontal vane Battery replacement indicator Signal transmitting Page 3 section Vertical vane Distance of signal : Operation Air inlet About 6 m display section Intake grille Air outlet Beep(s) is (are) heard from the indoor unit when the signal is received. -
Page 6: Auto Restart Function
● OPERATING INSTRUCTIONS ● ELECTING OPERATION MODES AUTO mode (Auto changeover) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL↔HEAT) when the room temperature is about 2°C away from the set temperature for more than 15 minutes. -
Page 7: Save Operation
AN SPEED AND AIRFLOW -SAVE OPERATION DIRECTION ADJUSTMENT Press to select fan speed. Each press changes Press during COOL, or HEAT mode to select fan speed in the following order: i-save mode. (AUTO) (Quiet) (Low) (Med.) (High) Set the temperature, fan speed and airfl ow direction. •... -
Page 8: Econo Cool Operation
● OPERATING INSTRUCTIONS ● CONO COOL OPERATION Press during COOL mode page 5 to start ECONO COOL operation. The unit performs swing operation vertically in various cycle according to the temperature of the unit. Set temperature is set 2°C higher auto- matically. -
Page 9: Weekly Timer Operation
EEKLY TIMER OPERATION • A maximum of 4 ON or OFF timers can be set for individual days of the week. • A maximum of 28 ON or OFF timers can be set for a week. Press , and to set ON/OFF, time, and E.g. - Page 10 ● OPERATING INSTRUCTIONS ● LEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Do not expose parts to direct sunlight, heat, or fl ames to dry. • Be careful not to touch the metal parts with your hands. •...
- Page 11 LEANING Air fi lter (Air purifying fi lter) • Clean every 2 weeks • Remove dirt by a vacuum cleaner, or rinse with water. • Dry it well in shade before installing it. Install the tabs into the intake grille hole. Air cleaning fi...
- Page 12 ● OPERATING INSTRUCTIONS ● HEN YOU THINK THAT TROUBLE HAS OCCURRED Even if these items are checked, when the unit does not recover from the Symptom Explanation & Check points trouble, stop using the air conditioner and consult your dealer. Does not cool or heat The room cannot be cooled •...
-
Page 13: Electrical Work
HEN THE AIR CONDITIONER IS NOT NSTALLATION PLACE AND GOING TO BE USED FOR A LONG TIME ELECTRICAL WORK Installation place Operate by COOL mode with the highest temperature Avoid installing the air conditioner in the following places. set or FAN mode for 3 to 4 hours. Page 5 •... - Page 16 HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN RG79Y943H01...