Auxiliary Functions - Blomberg DW51600SS User Manual

6.4 AUXILIARY FUNCTIONS

Washing programs of your dishwasher
are designed to obtain the best
cleaning effect, considering the type
of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions allow you save from
time, water and power.
C
Auxiliary functions may
cause changes in the
program duration.
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the program
will not be active.
Half Load function
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like. You can use both upper
and lower racks.
2. Turn the machine on with On/Off
key.
3. Select the desired program and
press the Half Load key. The Half
Load indicator will light on the
display in the Function Selected
indicator.
4. Close the door of the machine to
start the program.
Extra Rinse function
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
Sanitize Function
Sanitize function raises the water
temperature in the final rinse to
meet the requirements of NSF/ANSI
STANDARD 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments.
C
At the end of a succesfull
sanitization "S" is displayed
on the display. "S" is not
displayed on the display if
the cycle is interrupted or the
water could not be heated to
the required temperature.
C
Available programs are
indicated on Program Table
chart.
C
Note: Only sanitizing cycles
have been designed to meet
the requirements of 6 for
soil removal and sanitization
efficacy.
There is no intention, either
directly or indirectly, that
all cycles have passed
sanitization performance
tests.
Rapid Clean Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
Interior Lighting
(Select Models)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press
22
USA