Troubleshooting - Ryobi P540 Operator's Manual

PROBLEM
Bar and chain running hot
and smoking.
Motor runs, but chain is not
rotating.

TROUBLESHOOTING

cAUSE
1. Check chain tension for over
tight condition
. Chain oil tank empty.
1. Chain tension too tight.
. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
CALL us fIRsT
For any questions about operating or maintaining your product,
call the Ryobi
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
6
SOLUTION
1. Tension chain. Refer to chain Tension
earlier in this manual.
. Check oil tank.
1. Retension chain, Refer to chain Tension
earlier in this manual.
. Refer to Assembling the Bar and chain
earlier in this manual.
3. I nspect gui de b ar and chai n f or
damage.
Help Line!
®