Symbols - Ryobi PCN3840-RY74005D, PCN4545-RY74007D Operator's Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL
Safety Alert Symbol
Read Your Operator's Manual
Eye, Hearing, and Head Protection
SAFE-T-TIP Nose Guard
No Smoking
Operate with Two Hands
One Handed
Carbon Monoxide
Kick-back
Bar Nose Contact
Gloves
Switch
UK

SYMBOLS

NAME
6
EXPLANATION
Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Your manual contains special messages to bring
attention to potential safety concerns, machine damage
as well as helpful operating and servicing information.
Please read all the information carefully to avoid injury
and machine damage.
Wear eye, hearing, and head protection when operating
this equipment.
The SAFE-T-TIP nose guard on the guide bar helps
prevent kick-back.
No smoking, sparks, or open flame when mixing fuel or
filling the fuel tank.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an odourless,
deadly poison. Do not operate in an enclosed area.
Danger – beware of kick-back.
Avoid bar nose contact.
Wear non-slip gloves.
To stop the engine, move the switch to the "O" STOP
position.
I = ON to Run
O = OFF to Stop