Making Connections; Uno Keypad Port Connections - Russound SIX-SOURCE CONTROLLER CAM6.6 Instruction Manual

The UNO System Keypad Ports are located on
the back of the CAM6.6 in the top left of center.
Connections made at the UNO Keypad Ports are
made using CAT-5 T568A RJ-45 wire configura-
tion. CAT-5 is color-coded for ease of installa-
tion. For a clean installation when wiring from an
UNO System Keypad Port use an RJ-45 CAT-5
patch cable to connect from the keypad port to
an RJ-45 Wall Plate (optional). Using the same
CAM6.6T CAT-5 Cable
1201A/1A
Power
Supply

MAKING CONNECTIONS

UNO Keypad Port Connection
CAT-5 T568A RJ-45 wiring configuration, use
CAT-5 from the RJ-45 Wall Plate to the keypad.
If using more than one keypad on a zone, con-
nect a SA-ZX3 UNO System Keypad Splitter
(optional) directly to the UNO System Keypad
Port instead of going through the wall plate.
Always use the CAT-5 T568A RJ-45 wire configu-
ration when wiring any of the UNO System
Keypad Ports.
SA-ZX3
INSTALLER
CAM6.6
CAT-5 Cable
PM Mod 3D
with RJ-45
CAT-5 Cable
33