Fujitsu AGU9RLF Design & Technical Manual page 5

Flexible & easy installation
z „
Piping space is wide and connection work is easy.
Beneath standard window
600
(23-5/8)
700
(27-9/16)
740
(29-1/8)
200
(7-7/8)
Unit: mm(in.)
Choice of 6-direction drain &
piping connection
1
Drain hose
Piping
2
3
Super quiet operation
z „
Air flow mode can be set in 4 steps and more detailed air flow setting is possible.
Powerful operation
z „
Continuous operation by maximum air flow and maximum compressor speed after a certain
period of time allows the temperature to reach the setting temp. quickly.
Setting temp.
Normal mode
Powerful operation mode
MIN. HEAT Operation
z „
The room temperature can be set to go no lower than 50°F (10°C),
thus ensuring that the room does not get too cold when not occupied
Caution)
•
When the room temperature is higher than 50°F (10°C), "
temperature at 50°F (10°C) when the temperature drops below 50°F (10°C).
• MIN. HEAT" operation stops, the room set temperature quickly returns to the preset temperature.
When "
"MIN. HEAT"
Button ON
68
°F
(20 )
°C
50
°F
(10 )
°C
Standard concave portion
Min. 940(37)
Min.
700
(27-
9/16)
Unit: mm(in.)
Back view
6
5
4
Time
*Only available with Wireless RC.
MIN. HEAT" operation does not start. Operation starts and maintains the room
Indoor unit
operation START
- (01 - 02) -
Wall
Min.
590
(23-
1/4)
Min. 730
(28-3/4)
Max. 150
(5-7/8)
Unit: mm(in.)
Space is wide and
piping work is easy
Front view
Fan motor
Half concealed
Max.
80
(3-1/8)
Unit: mm(in.)
Large piping
bend R