Samsung RF30HBEDBSR Service Manual page 22

PRODUCT SPECIFICATIONS
■Evaporator
1. Role: As the low pressure liquid refrigerant flowed from capillary absorbs heat inside of
the refrigerator, it becomes low pressure gas and refrigerate the foods.
2. Theory: The low pressure refrigerant flowed to evaporator operates cooling which takes
ambient evaporated potential heat with maintaining the evaporation up to evaporate
completely.
3. Type
A. ROLL-BOND Evaporator ⇢ Direct Cooling ONE-DOOR Type
☞ Rolled and adhere the 2 aluminum plate and then make refrigerant passage.
B. FIN-PIPE Evaporator ⇢ Indirect cooling TWO-DOOR Type
☞ a small aluminum plate on the aluminum pipe to increase the cooling effect.
■Compressor
1. Role: It operates same as pump which pull out the subterranean water. It inhales the
low temperature and pressure refrigerant gas (flowed out) from evaporator and make
high temperature and pressure refrigerant liquid in the compressor and send it to the
condenser.
2. Type
a. Back-and-forth motion type: A method that pistol makes back-and-forth motion
through shaft and cylinder of motor rotation and compresses.
※ Used for household refrigerant
b. Rotary Type: A method that inhales the refrigerant gas through the gap between the
outside of rotor electric attached on the shaft and the inside of cylinder and
compresses.
c. Centrifugal Type
■Dryer
1. Role: Absorb the moisture from the refrigerant that refrigeration cycle circulates and
eliminate the foreign substance.
2. Structure: If even some moisture is included refrigerant is impossible to circulate by
freezing the small capillary outlet, so silica gel or molecular sieve is (included and) sealed
to absorb the internal moisture, and install a minute net to eliminate the foreign
substance.
22