Cleaning And Maintenance; Defrosting; Replacing Led Lighting; Shipment And Repositioning - Hoover BHBF 172 UKT User Manual

5. CLEANING AND
MAINTENANCE
• Disconnect the unit from the power
supply before cleaning.
• Do not clean the appliance by
pouring water.
• Make sure that no water enters the lamp
housing and other electrical components.
• The appliance should be cleaned
periodically using a solution of
bicarbonate of soda and lukewarm water.
• Clean the accessories separately
with soap and water Do not clean
them in the dishwasher.
• Do not use abrasive products, detergents
or soaps. After washing, rinse with clean
water and dry carefully. When you have
finished cleaning, reconnect the plugto the
mains supply with dry hands.
• Clean the condenser with a broom at least
twice a year. This will help you to save on
energy costs and increase productivity.
THE POWER SUPPLY MUST BE
DISCONNECTED.

5.1. Defrosting

• You refrigerator has fully automatic
defrosting. The water formed as a result of
defrosting passes through
the water collection
spout, flows into the
vaporisation container
below the condenser and
evaporates there.
Evaporation
container
EN - 13

5.2. Replacing LED Lighting

1 or 2 led strips in fridge is used to
illumianate your appliance. Please call the
service man.
Note: Numbers and location of led strips
may be changed according to the model.
!!! Some versions may be without
illumination.
Upper side LED strip
6. SHIPMENT AND
REPOSITIONING
6.1. Transportation and Changing of
Installation Position
• The original packages and foamed
polystyrene (PS) can be retained if
required.
• During transportation, the appliance
should be secured with a wide string or
a strong rope. The instructions written on
the corrugated box must be followed while
transporting.
• Before transporting or changing the
installation position, all the moving objects
(ie,shelves,crisper...) should be taken out
or fixed with bands in order to prevent
them from getting damaged.
Carry your freezer fridge in the upright
position.