KC9354/KC9354-2 INSTALLATION INSTRUCTIONS
Introduction / Tools and Materials Needed / Contact Info
Introduction:
Introduction / Tools and Materials Needed / Contact Info
Tools and Materials Needed:
1. Flat head screwdriver w/straight, 1/8" wide blade
2. Small Philips head screwdriver
3. 1/16" Allen wrench
4. Long nose needle-nose pliers
5. Center punch
6. Hammer
7. Power drill
8. 19/32" drill bit
9. 1/4" drill bit
10. Jig saw w/blade
11. Drill & Tap for 10-32 threads
Contact Information:
57049-A
The KC9354/KC9354-2 will allow access by allowing the trim to unlock the exit
device when an access code or iButton is entered and the turnpiece is turned coun-
terclockwise. Mechanical key override is standard. The trim is compatible with the
dogging features available with the Adams Rite® exit devices.
The KC9354/KC9354-2 is compatible with Adams Rite® 8600 concealed ver-
tical rod exit devices and 4780 Series 2-point deadlatches w/paddle on alumi-
num doors.
Schlage Lock Company
Forestville, CT 06010
technical support: 866-322-1237
fax: 866-322-1233
web: http://www.irsupport.net
575 Birch Street
Page 3
04-2007