Test Operation / Dimensions; Test Operation - Schlage KC9354 Installation Manual

KC9354/KC9354-2 INSTALLATION INSTRUCTIONS

Test Operation / Dimensions

Test Operation

Test Operation / Dimensions
1. Turnpiece should rotate freely.
2. Insert key into cylinder and rotate counterclockwise 180 degrees.
3. Rotate turnpiece clockwise to unlock device
> Door should be able to be opened.
4. Let go of the turnpiece and close the door
> Door should be locked.
5. Remove key.
6. Using the keypad, enter the default access code: 1 3 5 7 9. The red LED should light each time a
button is pressed and when 9 is pressed, the green LED should flash for five seconds during which
time the turnpiece should be engaged and door should be able to be opened again.
7. Test exit device to make sure it is operating properly. See to Adams Rite® instructions for more info.
SEE PROGRAMMING GUIDE FOR PROGRAMMING INFORMATION.
Dimensions
57049-A Page 20 04-2007