Table of Contents
Advertisement
IMPORTANT!
ELEVATOR HOLES MUST BE PARALLEL WITH
PLAYING SURFACE.
PLAYING
SURFACE
11
4
14.
Lower clamp cover (12) over clamps and snap into
proper position.
P/N 211376A
05/03
Remove pole cap (11) from bottom pole section and
12.
insert clamp cover (12) onto bottom section (3). Bend
back exposed top flange sections of secured ground
sleeve (4) as shown. Then insert pole into ground
sleeve (4).
13.
Secure clamps (7) around pole section as shown. Refer
to Step 4. Tighten completely.
3
12
8
WARNING
TWO PERSON MINIMUM
REQUIRED FOR THIS
PROCEDURE.
NOT FOLLOWING
RECOMMENDATION MAY
RESULT IN BODILY INJURY.
7
12
12
Advertisement
Table of Contents
