Tips - Wacom CTL-6100WL User Manual

Tip Double Click Distance
the slider.
Current Pressure : To see how hard you need to press with the pen, check your Current Pressure by pressing down with
the pen tip or eraser in an empty area of the Wacom Tablet Properties window.
If you want to change the amount of pressure you need to use the pen tip or eraser, move the
Feel sliders.
Options
: To select the way you right-click with the pen, click Options and select a different
Tilt Sensitivity
: To change how much the tilt of your hand affects your pen strokes, drag the slider. Open an application
that supports tilt to test while you are adjusting, so you can see how your changes affect your strokes.
Pen Feel Details : To change the tip sensitivity, click

Tips:

Click
Set the pen tip to
If you want a narrower range of pressure values in a pressure-sensitive application, select a soft
If the pen overreacts to slight pressure, try a firmer
If you notice a delay at the beginning of brush strokes, inking strokes, or drag actions, try a smaller
Distance
or set a pen button to double-click instead of the pen tip.
You can return the pen to default settings by going to the
: To change the distance between your pen and the tablet surface during a double-click, move
and one of the pen buttons to
Tip Feel
Customize and adjust advanced pen and eraser options.
Double-Click
.
setting.
Pen
tab in Wacom Tablet Properties
User's Manual
Tip Feel Eraser
and
Side Switch Mode
.
Tip Feel
.
Tip Double Click
Default
and clicking .
17
17