Picture - Runco VIDEO XTREME VX-22I Installation & Operation Manual

Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio Control
Key
Cinema CINEMA
Virtual Cinema VCINE
Use the controls in the Picture Menu to calibrate your VX-22i for optimum picture quality.
The VX-22i has been designed to incorporate setup and calibration standards established
by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Runco video display devices. Accordingly, Runco recommends that
setup and calibration be performed by an ISF certified installation technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately.
Runco VX-22i Installation/Operation Manual
Description
2.35:1 Image on
16:9 Screen
(Cinema aspect ratio / no CineWide)
2.35:1 Image on
2.35:1 Screen
( Cinema aspect ratio / CineWide)
16:9 Image on
16:9 Image on
2.35:1 Screen
2.35:1 Screen
16:9 Image on
2.35:1 Screen with
Virtual Cinema
Select Cinema to view 2.35
source material in its native
aspect ratio.
With a 16:9 screen and a
non-CineWide projector (no
anamorphic lens), the upper and
lower portions of the screen are
masked, but the geometry of the
active image area is unchanged.
With a 2.35:1 screen and a
CineWide-equipped projector,
the VX-22i scales the 2.35:1
image so that the active image
area fills the 16:9 chip surface,
eliminating the black bars. The
secondary, anamorphic lens
then restores the proper
geometry to the 2.35:1 image.
A 16:9 image is scaled
NON-linearly (more on the sides
than in the center) to fit a 2.35:1
screen.
Virtual Cinema is available only
on the VX-22i/CineWide.
49

Picture

Picture
Brightness
Contrast
Color
Tint
Sharpness