Setting The Menu; Selecting The Input Source; Pip / Pbp Function - Runco Reflection CL-810 Owner's Operating Manual

• Press INFO to view information about the
active signal source and aspect ratio.
Press MENU to open or close the on-screen
•
menu.
• Use the arrow buttons (▲,◄,▼,►) to select
menu items or make adjustments.
Press ENTER or ► to enter the setting of
•
items in the menu, or press EXIT to leave
and save the setting of items in the menu.
• When you turn on the projector, it searches
for the input source you selected last
time.
• You may select the input source directly
on the remote control.
• For PIP (Picture In Picture) and PBP (Picture
By Picture) purposes, there are two groups
of inputs separated by their display modes:
Video group: Video, S-Video and
Component Y/C /C
B R
Graphic (HD) group: HDMI and RGB/
Component HD inputs.
• PIP / PBP shows one input from the
Graphic group within or beside one input
from the Video group.
• Press PBP to enable the PBP function.
Press PBP again to switch the screens
left to right. Press PBP again to turn PBP
off.
• Press ACT (Active) to switch to the active
window. You can only change the input
signal settings in the active window.
• Press PIP to enable the PIP function.
Press PIP again to switch the main window.
Press PIP again to turn PIP off.
• Press PIP+ or PIP- to adjust the size of
the PIP window.
• Adjust the position of the PIP window with
the arrow buttons (▲,◄,▼,►).
Runco CL-810 Owner's Operating Manual
For more information
on settings, See "On-
Screen Display Menus"
on page 31.
inputs.
INFO RVR
ENTER
EXIT MENU
VID S-VID COMP1 COMP2
RGBHD HDMI
PBP ACT PIP PIP+
FOCUS ZOOM LENS PIP-
29
Basic Operation

Setting the Menu

Selecting the Input
Source

PIP / PBP Function