Installation; Remote Control; Battery Installation - Runco CINEWIDE VX-6000D Installation & Operation Manual

To install batteries in the remote control:
1. Remove the battery cover from the back of the remote control.
2. Insert the batteries included with the remote control. Ensure that the polarities
correctly match the
3. Replace the battery cover.
Setup Remote
1. Do not mix an old battery with a new one or different types of
Note
batteries.
2. If you will not use the remote control for a long time, remove the
batteries to avoid damage from battery leakage.
Runco VX-6000d Installation/Operation Manual
and markings inside the battery compartment.
Standard DHD Remote
17

3. Installation

3.1

Remote Control

Battery Installation