Pip Function; Turning Off The Power - Runco Reflection CL-700 Owner's Operating Manual

PIP Function

* Press the PIP button to enable the PIP function
* For PIP purposes, there are two groups of inputs
separated by their display modes:
Video Group: Video, S-Video and Component
Y/C /C inputs
B R
Graphic Group: HDTV input and Computer input.
* The PIP can show one input from the Graphic Group
within one input from the Video Group, or show one
input from Video Group within one input from the
Graphic Group.
* Press the PIP button to switch to the main window
or turn off PIP function.
* Select the input source of main window by pressing
the INPUT button.
* Press the ACTIVE button to switch to the active
window. You can change the input signal setting in
active window.
* Press PIP+ or PIP- to adjust the size of PIP window.
* Adjust the position of the PIP window with the ARROW
keys ( , , , ).

Turning off the Power

* Press the OFF key on the remote control to turn off the unit.
* The POWER LED will blink green and the fans will operate
for 1 minute to cool down the lamp. The projector will not
respond to any command for 1 minute.
* The POWER LED will light solid orange once the cooling
down cycle has completed.
* After turning off the unit, the POWER LED will blink green
and the fans will operate together for one minute.
* Fans will run for 3 minutes to cool.
* You may turn the projector back on after the first minute.
PIP ACTIVE PIP+
ON
VIDEO S-VIDEO COMPONENT
COMPONENT HD RGB HD
PIP-
LIGHT
OFF
PC