Runco Video Xtreme VX-2c Owner's Operating Manual page 24

Diagnose
Normal
Color Enable
Tests
From the Advanced menu use the Up or Down arrow to select "Diagnose" and press the Enter button to call up
the Diagnose options.
There are three options:
Normal: Return to normal video viewing
Color Enable: Red, Green, Blue, Yellow, Cyan, Magenta from the active video
Tests: Color Bar 75 IRE, Color Bar 100 IRE, External H Ramp, Test Black, Test White, Test Green, Test
Red, Test Blue, Check Board, Alignment, H Ramp and V Ramp
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
Lamp
Lamp Hours
Lamp S/N
Change Lamp
From the Advanced menu use the Up or Down arrow to select "Lamp" and press the Enter button to call up the
Lamp options.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
Diagnose
Indicates you are in the Diagnostics menu
Normal Press ENTER to return all Diagnostic Tests to their Normal
mode
Color Enable Press ENTER to individually Enable each Color
Tests Press ENTER to access External front end board and Internal
DLP Test Modes
Lamp
Indicates you are in the Lamp Settings menu
Lamp Hours Press ENTER to return the accumulated lamp operation hours
Lamp S/N Press ENTER to return the Lamp Serial Number
Change Lamp Press ENTER to indicate that the lamp has been changed and
the hours counter is to be reset to zero
MENU DESCRIPTION AND NAVIGATION
23