Panasonic KX-HNB600 User Manual page 95

3
Change the settings as desired, and then tap [OK].
– [Location]: This setting determines the location name assigned to the device.
– [Name]: This setting determines the name assigned to the device.
Device profiles for keychain remotes
1
From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Keychain
Remote].
2
Select the device that you want to change settings for.
3
Change the settings as desired, and then tap [OK].
– [Name]: This setting determines the name assigned to the device.
– [Smart Button]: This setting determines the operation assigned to the remote's "smart" button.
You can use the smart button to turn on a smart plug, or use it as a panic button that triggers the
alarm system.
Device profiles for keypads
1
From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Keypad].
2
Select the device that you want to change settings for.
3
Change the settings as desired.
– [Location]: This setting determines the location name assigned to the device.
– [Name]: This setting determines the name assigned to the device.
4
Tap [Keypad Settings].
5
Change the settings as desired, and then tap [OK].
– [Show Arm Status]: This setting determines whether the touchpanel buttons light to indicate the
current arm mode.
– [Talking Notification]
by the keypad.
– [Key Tone]: This setting determines whether key tones are heard when you enter numbers using
the touchpanel buttons.
6
Tap [OK].
*1 [Talking Notification] is only available for the following hub model numbers.
– KX-HNB600
– KX-HNB600E
– KX-HNB600G
Device profiles for backup batteries
1
From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Backup
Battery].
2
Select the device that you want to change settings for.
R For information about [Power Outage Notification], see "Configuring power outage notifications",
Page 67.
3
Change the settings as desired, and then tap [OK].
– [Connected Device]: Set this setting to match the device that is connected to the backup battery.
– [Name]: This setting determines the name assigned to the device.
– [Power Outage Detection]: This setting determines whether the backup battery detects power
outages.
– [Status LED]: This setting determines whether the device's LED indicator lights or is disabled.
*1
: This setting determines whether alarm and other events are announced
Using the app
95