2. INSTALLATION INSTRUCTIONS
* Refer to fixture installation manual for fixture mounting procedures
** Please refer to
www.Sylvania.com
2.1. STEP 1: Prepare fixture for installation
Turn power off before attempting installation
Remove lamp, original optical components, socket, and ballast
If photocell-controlled, connect unit after external control
Original optical
components
(reflectors)
Lamp
Socket
Ballast
Note: Minimum total fixture dimensions
Width
12"
for additional installation instructions
Fixture Dome Top
Fixture Globe
Fixture Base
Fixture Cover
Depth
Height
1
"
17
/
6"
8
Note: Failure to remove original components
including ballast will void product warranty.
POST-TOP
Note: Minimum total fixture dimensions
Height
20"
SHOEBOX
Original Ballast
Remove:
Fixture cover
Original ballast
Reflector housing
Ballast hinge bracket*
*Save all mounting screws
WARNING
!
Risk of electric shock
Disconnect power before servicing
WARNING
!
Risk of burn
Allow unit to cool fully before servicing
Width at Largest Diameter
9"
Ballast Hinge
Bracket
Reflector Housing
Bottom Opening
7.5"