Mitsubishi Electric A1SJ71AP23Q User Manual page 32

(3) Connection of cable for coaxial cable
The following shows how to connect a BNC connector (connector
plug for coaxial cable) and a cable.
(a) Components of BNC connector and coaxial cable
Components of BNC connector
Nut
Plug shell
Figure 5.4 Components of BNC connector and coaxial cable
(b) How to connect BNC connector and coaxial cable
1) Remove external sheath of a coaxial cable as shown
Measures for removing external sheath
2) Put a nut, washer, gasket, and clamp through the coaxial
3) Cut the external conductor, insulator, and internal
Washer
Clamp Contact
below.
Be careful not to damage an external conductor.r.
A
cable and unravel the external conductor.
Clamp
Gasket
conductor in the following dimensions.
As for the external conductor, cut it in the same dimensions
as taper part of the clamp, and smooth it down to the
clamp.
Components of coaxial cable
External sheath
Gasket
Applicable cable
3C-2V
5C-2V
Nut
Washer
15
External conductor
Insulator
Internal conductor
A
15mm (0.59 in.)
10mm (0.4 in.)