Dometic PR2500 Installation Manual page 18

Connecting the awning (only PR2500)
• Observe the required cable cross section when connecting to the power supply:
Cable length
2 m
4 m
6 m
8 m
Legend to fig. 8, page 7:
No. Description
1 Receiver
2 3 A fuse for LED awning light (optional)
3 on Orange line for D+ connection
4 rd Red line for LED awning light (optional)
5 bk Black line for LED awning light (optional)
6 bu Blue line for motor connection
7 bn Brown line for motor connection
8 bk Black line for power supply
9 rd Red line for power supply
10 Main switch
11 15 A fuse for main switch
Installing the wall switch
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
switch.
Installing the receiver of the remote control and connecting the electrical
connections
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
mounting bracket for the remote control.
➤ Connect the motor with the remote control in accordance with the applicable
electrical engineering regulations and the circuit diagram (fig. 8, page 7).
18
Required cable cross section
1.5 mm²
2.5 mm²
4.0 mm²
6.0 mm²
PR2000, PR2500
EN